Diamond Roller Dressing Spindles
Grease lubrication, Air cooling
=> A plan can be displayed and downloaded by clicking on the product names on the left side of the table (each as a PDF file – opens in a new window):
| Designation | Ø A mm | B mm | C mm | Ø D mm | Ø E mm | F mm | G mm | H mm | J mm | K mm | Ø L mm | Diamond roller outsideØ max. |
| AS72x225F/014 | 72 | 225 | 164 | 40 | 65 | 12 | 10 | 36 | – | 8xM5 | 56 | 140 |
| AS72x225F/015 | 72 | 225 | 164 | 40 | 65 | 12 | 10 | 36 | 20 | 8xM5 | 56 | 140 |
| AS80x225F/024 | 80 | 225 | 166 | 40 | 75 | 12 | 10 | 36 | – | 8xM5 | 56+65 | 150 |
| AS80x225F/025 | 80 | 225 | 166 | 40 | 75 | 12 | 10 | 36 | 20 | 8xM5 | 56+65 | 150 |
| AS80x225F/026 | 80 | 225 | 166 | 40 | 75 | 12 | 10 | 36 | 24 | 8xM5 | 56+65 | 150 |
| AS90x250F/024 | 90 | 250 | 202 | 40 | 72 | 12 | 12 | 38 | – | 8xM5 | 56 | 160 |
| AS90x250F/025 | 90 | 250 | 202 | 40 | 72 | 12 | 12 | 38 | 20 | 8xM5 | 56 | 160 |
| AS90x250F/026 | 90 | 250 | 202 | 40 | 72 | 12 | 12 | 38 | 24 | 8xM5 | 56 | 160 |
| AS100x300F/024 | 100 | 300 | 259 | 40 | 72 | 12 | 12 | 38 | – | 8xM5 | 56 | 180 |
| AS100x300F/025 | 100 | 300 | 259 | 40 | 72 | 12 | 12 | 38 | 20 | 8xM5 | 56 | 180 |
| AS100x300F/026 | 100 | 300 | 259 | 40 | 72 | 12 | 12 | 38 | 24 | 8xM5 | 56 | 180 |
| AS120x320F/024 | 120 | 320 | 263 | 52 | 92 | 17 | 14 | 41 | – | 8xM5 | 76 | 200 |
| AS120x320F/025 | 120 | 320 | 263 | 52 | 92 | 17 | 14 | 41 | 20 | 8xM5 | 76 | 200 |
| AS120x320F/026 | 120 | 320 | 263 | 52 | 92 | 17 | 14 | 41 | 24 | 8xM5 | 76 | 200 |
| Designation | Speed RPM max. | Power kW | Startingtime ED | Ampere A | Voltage V | Frequency Hz | Turning moment Nm | Air cooling bar | Air seal bar | Body acoustic sensor |
| AS72x225F/014 | 16500 | 0,46 | S6; 40% | 2 | 230 | 281 | 0,23 | – | 1–1,5 | – |
| AS72x225F/015 | 16500 | 0,46 | S6; 40% | 2 | 230 | 281 | 0,23 | – | 1–1,5 | Dittel |
| AS80x225F/024 | 15840 | 0,45 | S6; 60% | 3 | 230 | 534 | 0,27 | 3–4 | 1–1,5 | – |
| AS80x225F/025 | 15840 | 0,45 | S6; 60% | 3 | 230 | 534 | 0,27 | 3–4 | 1–1,5 | Dittel |
| AS80x225F/026 | 15840 | 0,45 | S6; 60% | 3 | 230 | 534 | 0,27 | 3–4 | 1–1,5 | Dittel |
| AS90x250F/024 | 19000 | 1,2 | S6; 40% | 5,3 | 220 | 642 | 0,60 | 3–4 | 1–1,5 | – |
| AS90x250F/025 | 19000 | 1,2 | S6; 40% | 5,3 | 220 | 642 | 0,60 | 3–4 | 1–1,5 | Dittel |
| AS90x250F/026 | 19000 | 1,2 | S6; 40% | 5,3 | 220 | 642 | 0,60 | 3–4 | 1–1,5 | Dittel |
| AS100x300F/024 | 13200 | 1,26 | S1; 100% | 4 | 350 | 450 | 0,91 | 3–4 | 1–1,5 | – |
| AS100x300F/025 | 13200 | 1,26 | S1; 100% | 4 | 350 | 450 | 0,91 | 3–4 | 1–1,5 | Dittel |
| AS100x300F/026 | 13200 | 1,26 | S1; 100% | 4 | 350 | 450 | 0,91 | 3–4 | 1–1,5 | Dittel |
| AS120x320F/024 | 8300 | 3,5 | S1; 100% | 11 | 350 | 284 | 4,10 | 3–4 | 1–1,5 | – |
| AS120x320F/025 | 8300 | 3,5 | S1; 100% | 11 | 350 | 284 | 4,10 | 3–4 | 1–1,5 | Dittel |
| AS120x320F/026 | 8300 | 3,5 | S1; 100% | 11 | 350 | 284 | 4,10 | 3–4 | 1–1,5 | Dittel |
Diamond Roller Dressing Spindles
Grease lubrication
=> A plan can be displayed and downloaded by clicking on the product names on the left side of the table (each as a PDF file – opens in a new window):
| Designation | Ø A
mm | B
mm | C
mm | Ø D
mm | Ø E
mm | F
mm | G mm | H
mm | J
mm | K
mm | Ø L mm | Ø M
mm | N mm | O mm | Diamond roller outsideØ max. |
| AS58x94F/001 | 58 | 94 | 79 | 20 | 52 | 10 | 27 | 15 | – | 6xM4 | 28 | 5,4 | 50 | 60 | 100 |
| AS58x94F/025 | 58 | 94 | 79 | 20 | 52 | 10 | 27 | 15 | 17 | 6xM4 | 28 | 5,4 | 50 | 60 | 100 |
| AS58x94F/026 | 58 | 94 | 79 | 20 | 52 | 10 | 30 | 15 | 20 | 6xM4 | 28 | 5,4 | 50 | 60 | 100 |
| Designation | Speed RPM max. | Power kW | Startingtime ED | Ampere A | Voltage V | Frequency Hz | Turning moment Nm | Air cooling bar | Air seal bar | Body acoustic sensor |
| AS58x94F/001 | 22420 | 0,20 | S6; 40% | 0,9 | 220 | 417 | 0,09 | – | 1–1,5 | – |
| AS58x94F/025 | 22420 | 0,20 | S6; 40% | 0,9 | 220 | 417 | 0,09 | – | 1–1,5 | Dittel |
| AS58x94F/026 | 22420 | 0,20 | S6; 40% | 0,9 | 220 | 417 | 0,09 | – | 1–1,5 | Dittel |
Diamond Roller Dressing Spindles
Grease lubrication, Air cooling
=> A plan can be displayed and downloaded by clicking on the product names on the left side of the table (each as a PDF file – opens in a new window):
| Designation | Ø A
mm | B mm | C mm | Ø D
mm | Ø E
mm | F
mm | G mm | H
mm | J
mm | Diamond roller outsideØ max. |
| AS42x147F/014 | 42 | 139 | 121 | 20 | 32 | 5 | 18 | 18 | – | 100 |
| AS42x147F/015 | 42 | 139 | 121 | 20 | 32 | 5 | 18 | 18 | 17 | 100 |
| Designation | Speed RPM max. | Power kW | Startingtime ED | Ampere A | Voltage V | Frequency Hz | Turning moment Nm | Air cooling bar | Air seal bar | Body acoustic sensor |
| AS42x147F/014 | 28400 | 0,32 | S6; 60% | 2 | 170 | 500 | 0,09 | – | 1–1,5 | – |
| AS42x147F/015 | 28400 | 0,32 | S6; 60% | 2 | 170 | 500 | 0,09 | – | 1–1,5 | Dittel |
Diamond Roller Dressing Spindle
Grease lubrication, without air cooling
AS58x111F/001
Diamond Roller Dressing Spindle AS-58x111F/001 (591.6 KiB)
Electrical connection:
Cable bolting: M20 with 10 metre cable
Without engine cooling
Operating mode S6; Duty Cycle 40%; Loading time 4 min;
Specifications:
- Dressing spindle outside Ø 58 h6
- Sleeve length 111 mm
- Mounting Ø 20 h2 mm (bore off dresser)
- Mounting width 12 mm (dresser width)
- Diamond roller outside Ø 60 mm – 100 mm
- n=19000 RPM; Grease lubrication;
- Air seal 1 bar
- Motor AC48/60/2
- 89Hz to 334Hz; 230V/AC;
- n=5000 RPM to 19000 RPM
- 1 pcs. PTC 130°
| Voltage V | 102 | 123 | 184 | 230 |
| Ampere A | 2,1 | 2,1 | 2 | 2 |
| Frequency Hz | 89 | 178 | 267 | 334 |
| Speed RPM | 5000 | 10000 | 15000 | 19000 |
| Power kW | 0,12 | 0,37 | 0,55 | 0,7 |
| Peak power kW | 0,2 | 0,37 | 0,55 | 0,7 |
| Turning moment Nm | 0,23 | 0,23 | 0,23 | 0,23 |
| Operating mode | S6 | S6 | S6 | S6 |
| Duty Cycle % | 40 | 40 | 40 | 40 |
Diamond Roller Dressing Spindle
Grease lubrication, without air cooling
AS58x111F/026
Diamond Roller Dressing Spindle AS-58x111F/026 (610.3 KiB)
Electrical connection:
Cable bolting: M20 with 10 metre cable
With internal sensor line Fa Dittel.
• Micro-M-Sensor Nr. F21430
• Micro-Übertrager Nr. O3PZ1134729
• Micro-Empfänger Nr. F22105
Without engine cooling
Operating mode S6; Duty Cycle 40%; Loading time 4 min;
Specifications:
- Dressing spindle outside Ø 58 h6
- Sleeve length 111 mm
- Mounting Ø 20 h2 mm (bore off dresser)
- Mounting width 12 mm (dresser width)
- Diamond roller outside Ø 60 mm – 100 mm
- n=19000 RPM; Grease lubrication;
- Air seal 1 bar
- Motor AC48/60/2
- 89Hz to 334Hz; 230V/AC;
- n=5000 RPM to 19000 RPM
- 1 pcs. PTC 130°
| Voltage V | 102 | 123 | 184 | 230 |
| Ampere A | 2,1 | 2,1 | 2 | 2 |
| Frequency Hz | 89 | 178 | 267 | 334 |
| Speed RPM | 5000 | 10000 | 15000 | 19000 |
| Power kW | 0,12 | 0,24 | 0,36 | 0,45 |
| Peak power kW | 0,2 | 0,37 | 0,55 | 0,7 |
| Turning moment Nm | 0,23 | 0,23 | 0,23 | 0,23 |
| Operating mode | S6 | S6 | S6 | S6 |
| Duty Cycle % | 40 | 40 | 40 | 40 |
Diamond Roller Dressing Spindle
AS72X205F/020
PDF Diamond Roller Dressing Spindle AS72x205F/020 (408.8 KiB)
Motor AC54-60.4
n=3000 RPM to 15600 RPM; 105Hz to 534Hz; 230V/AC;
6,3 Amper; 1 pcs. KTY 84-130; 1 pcs. PTC 130°
Specifications:
- Dressing spindle outside Ø 72 h6
- Sleeve length 205 mm
- Mounting Ø 40 h2 mm (bore off dresser)
- Mounting width 12 mm (dresser width)
- Diamond roller outside Ø 80 mm – 160 mm
- Combination Cooling air connection + Air purge connection p = 1 – 2 bar; CK-1/8-PK-4 n=15600 RPM; Grease lubrication;
| Cooling 2bar | air | air | air | air |
| Voltage V | 58 | 230 | 58 | 230 |
| Ampere A | 6,5 | 6,4 | 6,3 | 3,6 |
| Frequency Hz | 105 | 534 | 105 | 534 |
| Speed RPM | 2900 | 15680 | 2730 | 15580 |
| Power W | 190 | 1100 | 170 | 900 |
| Peak power W | 250 | 2200 | 250 | 2200 |
| Turning moment Nm | 0,66 | 0,67 | 0,56 | 0,55 |
| Operating mode | S6 | S6 | S1 | S1 |
| Duty Cycle % | 40 | 40 | 100 | 100 |
Electrical connection: (When ordering please specify)
8-pin Receptacle B EC A 120 MR 11 00 0200 000
or
8-pin angled connector BEWC089MR13000007000
Diamond Roller Dressing Spindle
AS72X220F/016
PDF Diamond Roller Dressing Spindle AS72X220F/016 (437.3 KiB)
Motor AC60-60.4
n=3000 RPM to 15840 RPM
108Hz to 534Hz; 230V/AC;
1 pcs. KTY 84-130; 1 pcs. PTC 130°
Specifications:
- Dressing spindle outside Ø 72 h6
- Sleeve length 220 mm
- Mounting Ø 40 h2 mm (bore off dresser)
- Mounting width 12 mm (dresser width)
- Diamond roller outside Ø 80 mm – 160 mm
- Air seal 1 bar Cooling air 2 bar or oil cooling 2l/min
- n=15840 RPM; Grease lubrication;
| Cooling 2bar | air | air | oil | oil |
| Voltage V | 70 | 230 | 85 | 230 |
| Ampere A | 4 | 3 | 5 | 5 |
| Frequency Hz | 108 | 534 | 111 | 534 |
| Speed RPM | 3000 | 15840 | 3000 | 15260 |
| Power W | 200 | 450 | 320 | 1200 |
| Peak power W | 250 | 1600 | 430 | 1600 |
| Turning moment Nm | 0,63 | 0,27 | 1,0 | 0,8 |
| Operating mode | S6 | S6 | S1 | S1 |
| Duty Cycle % | 60 | 60 | 100 | 100 |
Electrical connection: (When ordering please specify)
8-pin Receptacle B EC A 120 MR 11 00 0200 000
or
8-pin angled connector BEWC089MR13000007000
Diamond Roller Dressing Spindle
AS120X270F/033
PDF Diamond Roller Dressing Spindle AS120X270F/033 (491.2 KiB)
MMotor AC90-80.4
n=9720 RPM to 9720 RPM
200Hz to 330Hz; 380V/AC;
1 pcs. KTY 84-130; 1 pcs. PTC 130°
Specifications:
- Dressing spindle outside Ø 120 j6
- Sleeve length 270 mm
- Mounting Ø 52 h2 mm (bore off dresser)
- Mounting width 17 mm (dresser width)
- Diamond roller outside Ø 130 mm – 180 mm
- Air seal 1 bar Cooling air 2 bar or water cooling 2l/min
- n=9720 RPM; Grease lubrication;
| Cooling 2bar | water | water | air | air |
| Voltage V | 228 | 380 | 210 | 350 |
| Ampere A | 10,2 | 10 | 7,4 | 7,4 |
| Frequency Hz | 200 | 333 | 200 | 333 |
| Speed RPM | 5.670 | 9.720 | 5.780 | 9.790 |
| Power W | 2.700 | 4.500 | 1.800 | 3.000 |
| Peak power W | 4.100 | 8.800 | 3.300 | 7.200 |
| Turning moment Nm | 4,5 | 4,4 | 3,0 | 2,9 |
| Operating mode | S1 | S1 | S1 | S1 |
| Duty Cycle % | 100 | 100 | 100 | 100 |
Electrical connection: (When ordering please specify)
8-pin Receptacle B EC A 120 MR 11 00 0200 000
or
8-pin angled connector BEWC089MR13000007000