Further grinding devices ZSG150F/001
for contour grinding machines including
Grinding spindle SP60X300-HSK-C40/001 with tool holding device HSK-C-40
Manual clamping, permanent grease lubrication
Dovetail compound slides with 100mm hub each
Technical details of the drive: 1,1 KW; 230/400V; 50Hz
Rotation speed: 500min-1 to 12500min-1
Spindle holder: HSK-C-40 manual clamping
Grinding wheels: up to 150mm diametre
Width of the grinding wheels: 18mm
Spindle: 60mm diametre
Length of the spindle: 300mm
Toothed belt wheel drive: GT5MR/z=54
Toothed belt wheel spindle: GT5MR/z=24
Toothed belt wheel: GT5MR400; 20wide
2 pieces of dovetail compound slides: SSM200x310x100
Size 200, length 310, hub 100 with micrometer screws
The frequency inverter is placed in a switchbox.
The grinding spindle is driven at infinitely variable rotation speeds of 500min-1 to 12500min-1
Grinding wheel holder SSA32x16x100_HSK-C40-1 for external cylindrical grinding
Spindle holder: HSK-C40
For grinding wheels with an outside diametre of 150mm, 18mm wide and a drill hole diametre of 32mm
Cylindrical grinding devices
Description of the machine
The cylindrical grinding device is clamped into the lathe by the help of a multifix holder.
The grinding wheel for the internal and external grinding is inserted in the tool holder HSK-C-40 with manual cocking by the help of a grinding spindle with permanent lubrication.
The grinding spindle is driven by a three-phase-motor with a toothed-belt drive system which is designed for very high speeds.
The motor is driven by a frequency converter which is integrated into a separate switchbox. Therefore, infinitely variable speeds from 500min-1 up to 12500min-1 are possible. The direction of rotation can be modified by a trigger switch.
|Motor characteristics||1,1KW; 230/400V; 50Hz||0,55KW; 230/400V; 50Hz||1,1KW; 230/400V; 50Hz|
|Rotation speed||500min-1 bis 12500min-1||500min-1 bis 12500min-1||500min-1 bis 12500min-1|
|Spindel seat||HSK-C-40 manual cocking||HSK-C-40 manual cocking||HSK-C-40 manual cocking|
|Grinding wheel diameter||80mm to 150mm||80mm to 100mm||80mm to 150mm|
|Grinding wheel width||18mm||10mm||18mm|
|Interior diameter of the grinding tool||10m to 40mm||10m to 40mm||10m to 40mm|
|Toothed belt wheel motor||GT5MR/z=54||GT5MR/z=54||GT5MR/z=54|
|Toothed belt wheel spindle||GT5MR/z=24||GT5MR/z=24||GT5MR/z=24|
|Toothed belt||GT5MR400; 20wide||GT5MR400; 20wide||GT5MR400; 20wide|
Grinding wheel mounting HSK-C-40 for external wheel, internal grinding tool and polishing wheels
Cylindrical grinding device with switchbox, control panel and HSK-C40 grinding wheel mounting
Cylindrical grinding device with control panel and HSK-C40 mounting for external grinding wheels
Cylindrical grinding device with control panel and HSK-C40 mounting for internal grinding wheels