{"id":2831,"date":"2022-07-28T17:04:53","date_gmt":"2022-07-28T15:04:53","guid":{"rendered":"https:\/\/umzug.steinmetz-schleiftechnik.de.w01cb5cb.kasserver.com\/?page_id=2831"},"modified":"2022-09-13T16:54:33","modified_gmt":"2022-09-13T14:54:33","slug":"diamantrollen-aufnahmedorne","status":"publish","type":"page","link":"https:\/\/steinmetz-schleiftechnik.de\/en\/produkte\/diamantrollen-aufnahmedorne\/","title":{"rendered":"Diamond Roller Arbors"},"content":{"rendered":"\n
\n

for various diamond roller dressing units<\/h1>\n\n\n\n
\n
\n
\"\"<\/figure>\n\n\n\n

Smooth running is very important when truing a grinding wheel using a diamond roll. Our mandrels for diamond rolls comply with this requirement. A special design and highest precision of the bearings incorporated guarantee optimum results. They mandrels are adapted to suit our truing devices with diamond rolls.<\/p>\n\n\n\n

Mandrels for diamond rolls are produced in ultra-high precision. Radial run-out and axial run-out of the mandrel for the diamond roll are specified with a tolerance of 0.002 mm in radial and axial direction and thus ensure essential conditions for optimum and economic truing operations using a diamond roll.<\/p>\n\n\n\n

The OD of the mandrel of the diamond roll should be chosen as big as possible in order to ensure the maximum stiffness required.<\/p>\n\n\n\n

Mandrels for diamond rolls, used for diamond roll truing devices, are either grease-lubricated for life or oil-mist lubricated. The sense of rotation, either clockwise or anticlockwise, may be selected as required.<\/p>\n\n\n\n

For a quick change of the diamond roll, the complete set of diamond roll on its mandrel is provided. Maximum radial run-out and axial run-out of the mandrel for the diamond roll amount to a maximum of 2 \u03bcm.<\/p>\n\n\n\n

For every diamond roll a diamond roll mandrel should be provided. When exchanging the complete unit of mandrel and diamond roll the following advantages result: The supplier of the diamond roll may mount the diamond roll on the mandrel, thus optimizing radial run-out and side run-out.<\/p>\n<\/div>\n\n\n\n

\n

Furthermore<\/h3>\n\n\n\n
  • Quick changing of diamond roll with mandrel<\/li>
  • Low wear of diamond roll mandrel<\/li>
  • Low wear of diamond roll<\/li>
  • Better results for truing operation<\/li><\/ul>\n<\/div>\n<\/div>\n\n\n\n

    Diamond Roller Dressing Arbors<\/h3>\n\n\n\n

    Grease lubrication<\/h4>\n\n\n\n
    \n
    \n
    \"\"<\/figure>\n<\/div>\n\n\n\n
    \n
    \"\"<\/figure>\n<\/div>\n<\/div>\n\n\n\n
    => A plan can be displayed and downloaded by clicking on the product names on the left side of the table (each as a PDF file – opens in a new window):<\/h5>\n\n\n\n
    Designation<\/td>\u00d8 A
    \u2028mm<\/td>    		B
    \u2028mm<\/td>    		\u00d8 C\u2028
    mm<\/td>    		D\u2028
    mm<\/td>    		\u00d8 E
    \u2028mm<\/td>    		F \u2028
    mm<\/td>    		\u00d8 G
    mm<\/td>    		H\u2028
    mm<\/td>    		I\u2028
    mm<\/td>    		J\u2028
    mm<\/td>    		K\u2028
    mm<\/td>    		\u00d8 L\u2028
    mm<\/td>    		M\u2028
    mm<\/td>    		Speed RPM max.<\/td><\/tr>
    STR52x50F\/006<\/a><\/td>52<\/td>50<\/td>80<\/td>64<\/td>48<\/td>50<\/td>24<\/td>30<\/td>13<\/td>15<\/td>40<\/td>6<\/td>226,5<\/td>4500<\/td><\/tr>
    STR52x100F\/003<\/a><\/td>52<\/td>100<\/td>80<\/td>64<\/td>48<\/td>50<\/td>24<\/td>30<\/td>13<\/td>15<\/td>40<\/td>6<\/td>276,5<\/td>4500<\/td><\/tr>
    STR52x150F\/003<\/a><\/td>52<\/td>150<\/td>80<\/td>64<\/td>48<\/td>50<\/td>24<\/td>30<\/td>13<\/td>15<\/td>40<\/td>6<\/td>326,5<\/td>4500<\/td><\/tr>
    STR52x200F\/006<\/a><\/td>52<\/td>200<\/td>80<\/td>64<\/td>48<\/td>50<\/td>24<\/td>30<\/td>13<\/td>15<\/td>40<\/td>6<\/td>376,5<\/td>4500<\/td><\/tr>
     <\/td> <\/td> <\/td> <\/td> <\/td> <\/td> <\/td> <\/td> <\/td> <\/td> <\/td> <\/td> <\/td> <\/td> <\/td><\/tr>
    STR56x50F\/006<\/a><\/td>56<\/td>50<\/td>80<\/td>64<\/td>48<\/td>50<\/td>24<\/td>30<\/td>13<\/td>15<\/td>40<\/td>6<\/td>226,5<\/td>4500<\/td><\/tr>
    STR56x100F\/003<\/a><\/td>56<\/td>100<\/td>80<\/td>64<\/td>48<\/td>50<\/td>24<\/td>30<\/td>13<\/td>15<\/td>40<\/td>6<\/td>276,5<\/td>4500<\/td><\/tr>
    STR56x150F\/003<\/a><\/td>56<\/td>150<\/td>80<\/td>64<\/td>48<\/td>50<\/td>24<\/td>30<\/td>13<\/td>15<\/td>40<\/td>6<\/td>326,5<\/td>4500<\/td><\/tr>
    STR56x200F\/006<\/a><\/td>56<\/td>200<\/td>80<\/td>64<\/td>48<\/td>50<\/td>24<\/td>30<\/td>13<\/td>15<\/td>40<\/td>6<\/td>376,5<\/td>4500<\/td><\/tr>
     <\/td> <\/td> <\/td> <\/td> <\/td> <\/td> <\/td> <\/td> <\/td> <\/td> <\/td> <\/td> <\/td> <\/td> <\/td><\/tr>
    STR63x50F\/006<\/a><\/td>63<\/td>50<\/td>80<\/td>64<\/td>60<\/td>60<\/td>24<\/td>30<\/td>13<\/td>15<\/td>40<\/td>6<\/td>237<\/td>4500<\/td><\/tr>
    STR63x100F\/006<\/a><\/td>63<\/td>100<\/td>80<\/td>64<\/td>60<\/td>60<\/td>24<\/td>30<\/td>13<\/td>15<\/td>40<\/td>6<\/td>287<\/td>4500<\/td><\/tr>
    STR63x150F\/001<\/a><\/td>63<\/td>150<\/td>80<\/td>64<\/td>60<\/td>60<\/td>24<\/td>30<\/td>13<\/td>15<\/td>40<\/td>6<\/td>337<\/td>4500<\/td><\/tr>
    STR63x200F\/005<\/a><\/td>63<\/td>200<\/td>80<\/td>64<\/td>60<\/td>60<\/td>24<\/td>30<\/td>13<\/td>15<\/td>40<\/td>6<\/td>387<\/td>4500<\/td><\/tr>
     <\/td> <\/td> <\/td> <\/td> <\/td> <\/td> <\/td> <\/td> <\/td> <\/td> <\/td> <\/td> <\/td> <\/td> <\/td><\/tr>
    STR80x100F\/003<\/a><\/td>80<\/td>100<\/td>100<\/td>78<\/td>75<\/td>62<\/td>25<\/td>40<\/td>13<\/td>18<\/td>55<\/td>6<\/td>316<\/td>4300<\/td><\/tr>
    STR80x150F\/003<\/a><\/td>80<\/td>150<\/td>100<\/td>78<\/td>75<\/td>62<\/td>25<\/td>40<\/td>13<\/td>18<\/td>55<\/td>6<\/td>366<\/td>4300<\/td><\/tr>
    STR80x200F\/003<\/a><\/td>80<\/td>200<\/td>100<\/td>78<\/td>75<\/td>62<\/td>25<\/td>40<\/td>13<\/td>18<\/td>55<\/td>6<\/td>416<\/td>4300<\/td><\/tr>
    STR80x300F\/003<\/a><\/td>80<\/td>300<\/td>100<\/td>78<\/td>75<\/td>62<\/td>25<\/td>40<\/td>13<\/td>18<\/td>55<\/td>6<\/td>516<\/td>4300<\/td><\/tr>
     <\/td> <\/td> <\/td> <\/td> <\/td> <\/td> <\/td> <\/td> <\/td> <\/td> <\/td> <\/td> <\/td> <\/td> <\/td><\/tr>
    STR100x400F\/001<\/a><\/td>100<\/td>400<\/td>140<\/td>132<\/td>95<\/td>105<\/td>55<\/td>80<\/td>20<\/td>20<\/td>90<\/td>8<\/td>764<\/td>3000<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n
    \n
    \n
    \"\"<\/figure>\n<\/div>\n\n\n\n
    \n
    \"\"<\/figure>\n<\/div>\n<\/div>\n\n\n\n
    => A plan can be displayed and downloaded by clicking on the product names on the left side of the table (each as a PDF file – opens in a new window):<\/h5>\n\n\n\n
    Designation<\/td>\u00d8 A\u2028
    mm<\/td>    		B\u2028
    mm<\/td>    		\u00d8 C\u2028
    mm<\/td>    		D\u2028
    mm<\/td>    		\u00d8 E\u2028
    mm<\/td>    		F \u2028
    mm<\/td>    		H\u2028
    mm<\/td>    		I\u2028
    mm<\/td>    		J\u2028
    mm<\/td>    		K\u2028
    mm<\/td>    		\u00d8 L\u2028
    mm<\/td>    		M\u2028
    mm<\/td>    		Speed RPM max.<\/td><\/tr>
    STNO52x40F<\/a><\/td>52<\/td>40<\/td>46<\/td>16<\/td>46<\/td>21<\/td>11<\/td>4<\/td>11<\/td>8<\/td>4<\/td>106<\/td>4500<\/td><\/tr>
    STNO52x42F<\/a><\/td>52<\/td>42<\/td>46<\/td>19<\/td>46<\/td>21<\/td>10<\/td>4<\/td>9<\/td>8,5<\/td>4<\/td>109<\/td>4500<\/td><\/tr>
    STNO52x49F<\/a><\/td>52<\/td>46<\/td>46<\/td>17<\/td>46<\/td>21<\/td>10<\/td>3,5<\/td>10<\/td>8,5<\/td>4<\/td>115<\/td>4500<\/td><\/tr>
    STNO52x56F<\/a><\/td>52<\/td>56<\/td>46<\/td>12<\/td>46<\/td>21<\/td>11<\/td>4<\/td>9<\/td>8<\/td>4<\/td>116<\/td>4500<\/td><\/tr>
    STNO52x62F\/001<\/a><\/td>52<\/td>62<\/td>46<\/td>18<\/td>46<\/td>23<\/td>18<\/td>4<\/td>9<\/td>8,5<\/td>4<\/td>136<\/td>4500<\/td><\/tr>
     <\/td> <\/td> <\/td> <\/td> <\/td> <\/td> <\/td> <\/td> <\/td> <\/td> <\/td> <\/td> <\/td> <\/td><\/tr>
    STNO55X80F\/001<\/a><\/td>55<\/td>80<\/td>46<\/td>18<\/td>46<\/td>23<\/td>18<\/td>4<\/td>8<\/td>8,5<\/td>4<\/td>154<\/td>4500<\/td><\/tr>
     <\/td> <\/td> <\/td> <\/td> <\/td> <\/td> <\/td> <\/td> <\/td> <\/td> <\/td> <\/td> <\/td> <\/td><\/tr>
    STNO63X42F<\/a><\/td>63<\/td>42<\/td>46<\/td>18<\/td>46<\/td>23<\/td>11<\/td>4<\/td>8<\/td>8,5<\/td>4<\/td>109<\/td>4300<\/td><\/tr>
    STNO63X56F\/001<\/a><\/td>63<\/td>56<\/td>46<\/td>13<\/td>46<\/td>21<\/td>11<\/td>4<\/td>9<\/td>8<\/td>4<\/td>116<\/td>4300<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n

    Diamond Roller Dressing Arbors<\/h3>\n\n\n\n

    Oil mist lubrication<\/h4>\n\n\n\n
    \n
    \n
    \"\"<\/figure>\n<\/div>\n\n\n\n
    \n
    \"\"<\/figure>\n<\/div>\n<\/div>\n\n\n\n
    => A plan can be displayed and downloaded by clicking on the product names on the left side of the table (each as a PDF file – opens in a new window):<\/h5>\n\n\n\n
    Designation<\/td>\u00d8 A\u2028
    mm<\/td>    		B
    \u2028mm<\/td>    		C\u2028
    mm<\/td>    		D
    \u2028mm<\/td>    		E
    \u2028mm<\/td>    		\u00d8 F
    \u2028mm<\/td>    		G
    \u2028mm<\/td>    		H
    \u2028mm<\/td>    		J
    \u2028mm<\/td>    		M\u2028
    mm<\/td>    		Speed RPM max.<\/td><\/tr>
    RD52x130\u00d6\/005<\/a><\/td>52<\/td>130<\/td>72<\/td>62<\/td>110<\/td>212<\/td>20<\/td>92<\/td>20<\/td>230,288<\/td>4500<\/td><\/tr>
    RD52x170\u00d6\/005<\/a><\/td>52<\/td>170<\/td>72<\/td>62<\/td>110<\/td>252<\/td>20<\/td>92<\/td>20<\/td>270,288<\/td>4500<\/td><\/tr>
    RD52x280\u00d6\/005<\/a><\/td>52<\/td>280<\/td>72<\/td>62<\/td>110<\/td>363<\/td>20<\/td>92<\/td>21<\/td>381,288<\/td>4500<\/td><\/tr>
     <\/td> <\/td> <\/td> <\/td> <\/td> <\/td> <\/td> <\/td> <\/td> <\/td> <\/td> <\/td><\/tr>
    RD56x120\u00d6\/001<\/a><\/td>56<\/td>120<\/td>72<\/td>72<\/td>110<\/td>212<\/td>20<\/td>92<\/td>20<\/td>230,288<\/td>4500<\/td><\/tr>
    RD56x130\u00d6\/001<\/a><\/td>56<\/td>130<\/td>72<\/td>62<\/td>110<\/td>212<\/td>20<\/td>92<\/td>20<\/td>230,288<\/td>4500<\/td><\/tr>
    RD56x170\u00d6\/001<\/a><\/td>56<\/td>170<\/td>72<\/td>62<\/td>110<\/td>252<\/td>20<\/td>92<\/td>20<\/td>270,288<\/td>4500<\/td><\/tr>
    RD56x280\u00d6\/001<\/a><\/td>56<\/td>280<\/td>72<\/td>62<\/td>110<\/td>363<\/td>20<\/td>92<\/td>21<\/td>381,288<\/td>4500<\/td><\/tr>
     <\/td> <\/td> <\/td> <\/td> <\/td> <\/td> <\/td> <\/td> <\/td> <\/td> <\/td> <\/td><\/tr>
    RD65x180\u00d6<\/a><\/td>65<\/td>180<\/td>80<\/td>14<\/td>110<\/td>212<\/td>20<\/td>92<\/td>18<\/td>230,288<\/td>4500<\/td><\/tr>
    RD65x220\u00d6<\/a><\/td>65<\/td>220<\/td>80<\/td>14<\/td>110<\/td>252<\/td>20<\/td>92<\/td>18<\/td>270,288<\/td>4500<\/td><\/tr>
    RD65x330\u00d6<\/a><\/td>65<\/td>330<\/td>80<\/td>14<\/td>110<\/td>363<\/td>20<\/td>92<\/td>19<\/td>381,288<\/td>4500<\/td><\/tr><\/tbody><\/table><\/figure>\n<\/div><\/div>\n","protected":false},"excerpt":{"rendered":"

    for various diamond roller dressing units Smooth running is very important when truing a grinding wheel using a diamond roll. Our mandrels for diamond rolls comply with this requirement. A special design and highest precision of the bearings incorporated guarantee optimum results. They mandrels are adapted to suit our truing devices with diamond rolls. Mandrels […]<\/p>\n","protected":false},"author":5,"featured_media":3860,"parent":9,"menu_order":60,"comment_status":"closed","ping_status":"closed","template":"","meta":{"footnotes":""},"class_list":["post-2831","page","type-page","status-publish","has-post-thumbnail","hentry"],"_links":{"self":[{"href":"https:\/\/steinmetz-schleiftechnik.de\/en\/wp-json\/wp\/v2\/pages\/2831","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/steinmetz-schleiftechnik.de\/en\/wp-json\/wp\/v2\/pages"}],"about":[{"href":"https:\/\/steinmetz-schleiftechnik.de\/en\/wp-json\/wp\/v2\/types\/page"}],"author":[{"embeddable":true,"href":"https:\/\/steinmetz-schleiftechnik.de\/en\/wp-json\/wp\/v2\/users\/5"}],"replies":[{"embeddable":true,"href":"https:\/\/steinmetz-schleiftechnik.de\/en\/wp-json\/wp\/v2\/comments?post=2831"}],"version-history":[{"count":11,"href":"https:\/\/steinmetz-schleiftechnik.de\/en\/wp-json\/wp\/v2\/pages\/2831\/revisions"}],"predecessor-version":[{"id":4264,"href":"https:\/\/steinmetz-schleiftechnik.de\/en\/wp-json\/wp\/v2\/pages\/2831\/revisions\/4264"}],"up":[{"embeddable":true,"href":"https:\/\/steinmetz-schleiftechnik.de\/en\/wp-json\/wp\/v2\/pages\/9"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/steinmetz-schleiftechnik.de\/en\/wp-json\/wp\/v2\/media\/3860"}],"wp:attachment":[{"href":"https:\/\/steinmetz-schleiftechnik.de\/en\/wp-json\/wp\/v2\/media?parent=2831"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}