{"id":2829,"date":"2022-07-28T17:04:17","date_gmt":"2022-07-28T15:04:17","guid":{"rendered":"https:\/\/umzug.steinmetz-schleiftechnik.de.w01cb5cb.kasserver.com\/?page_id=2829"},"modified":"2022-11-03T17:42:50","modified_gmt":"2022-11-03T16:42:50","slug":"diamantrollen-abrichtgeraete","status":"publish","type":"page","link":"https:\/\/steinmetz-schleiftechnik.de\/en\/produkte\/diamantrollen-abrichtgeraete\/","title":{"rendered":"Diamond Roller Dressing Units"},"content":{"rendered":"\n
\n

Diamond Roller Dressing Unit<\/h3>\n\n\n\n

for flat grinders, round grinders, internal circular grinders and slide way grinders<\/strong><\/p>\n\n\n\n

\n
\n

Our truing devices with diamond rolls fulfil the specific requirements for diamond truing rolls. Performance and accuracy of the grinding wheel truing operation are decisively determined by the truing device in which the diamond truing roll is used.Our truing devices stand out because of their rigid design. Good damping capacity is guaranteed due to the basic construction in stress-relieved cast-iron (GG25).<\/p>\n\n\n\n

The diamond roll is driven by an asynchronous motor, a three-phase motor, or a hydraulic axial piston motor. The asynchronous motor may be controlled up to a frequency of 100 CPS using a frequency converter.<\/p>\n<\/div>\n\n\n\n

\n

The mandrels for diamond rolls may be grease-lubricated for life or oil-mist lubricated. The sense of rotation is ad lib, the device may be used for clockwise or anti-clockwise operation. Quick change of the diamond roll is possible, using a mandrel for the diamond roll. The maximum admissible round and axial run-out amounts to 2\u03bcm.<\/p>\n\n\n\n

facilitate and speed up the change of the diamond roll. Furthermore, the diamond roll may be mounted on the mandrel by the supplier of the diamond roll, thus optimizing round and axial run-out.<\/p>\n<\/div>\n<\/div>\n\n\n\n

Advantages<\/h3>\n\n\n\n
  • Quick changing of the diamond roll with mandrel<\/li>
  • Low wear of the mandrel for diamond roll<\/li>
  • Low wear of the diamond roll<\/li>
  • Better truing<\/li><\/ul>\n\n\n\n

    Grease lubrication<\/h4>\n\n\n\n
    \n
    \n
    \"\"<\/figure>\n<\/div>\n\n\n\n
    \n
    \"\"<\/figure>\n<\/div>\n<\/div>\n\n\n\n
    => A plan can be displayed and downloaded by clicking on the product names on the left side of the table (each as a PDF file – opens in a new window):<\/h5>\n\n\n\n
    Designation<\/td>\u00d8 A\u2028
    mm<\/td>    		B\u2028
    mm<\/td>    		C\u2028
    mm<\/td>    		\u00d8 D\u2028
    mm<\/td>    		\u00d8 E\u2028
    mm<\/td>    		F \u2028
    mm<\/td>    		G
    \u2028mm<\/td>    		H\u2028
    mm<\/td>    		I\u2028
    mm<\/td>    		J\u2028
    mm<\/td>    		K\u2028
    mm<\/td>    		\u00d8 L
    \u2028mm<\/td>    		M\u2028
    mm<\/td>    		N\u2028
    mm<\/td>    		O
    \u2028mm<\/td>    		P\u2028
    mm<\/td>    		R\u2028
    mm<\/td>    		Diamond roller
    outside\u00d8 max.<\/td><\/tr>
    DRS52x50F\/006<\/a><\/td>52<\/td>50<\/td>110<\/td>162<\/td>165<\/td>395<\/td>180<\/td>323<\/td>236<\/td>70<\/td>15<\/td>115<\/td>65<\/td>80<\/td>110<\/td>125<\/td>53<\/td>150<\/td><\/tr>
    DRS52x100F\/005<\/a><\/td>52<\/td>100<\/td>110<\/td>162<\/td>165<\/td>395<\/td>230<\/td>300<\/td>236<\/td>70<\/td>15<\/td>115<\/td>65<\/td>80<\/td>160<\/td>175<\/td>53<\/td>150<\/td><\/tr>
    DRS52x150F\/009<\/a><\/td>52<\/td>150<\/td>125<\/td>177<\/td>169<\/td>415<\/td>280<\/td>363<\/td>292<\/td>70<\/td>15<\/td>115<\/td>65<\/td>80<\/td>210<\/td>225<\/td>53<\/td>150<\/td><\/tr>
    DRS52x200F\/003<\/a><\/td>52<\/td>200<\/td>125<\/td>177<\/td>169<\/td>415<\/td>330<\/td>363<\/td>292<\/td>70<\/td>15<\/td>115<\/td>65<\/td>80<\/td>260<\/td>275<\/td>53<\/td>150<\/td><\/tr>
     <\/td> <\/td> <\/td> <\/td> <\/td> <\/td> <\/td> <\/td> <\/td> <\/td> <\/td> <\/td> <\/td> <\/td> <\/td> <\/td> <\/td> <\/td> <\/td><\/tr>
    DRS56x50F\/006<\/a><\/td>56<\/td>50<\/td>110<\/td>162<\/td>165<\/td>395<\/td>180<\/td>323<\/td>236<\/td>70<\/td>15<\/td>115<\/td>65<\/td>80<\/td>110<\/td>125<\/td>53<\/td>150<\/td><\/tr>
    DRS56x100F\/005<\/a><\/td>56<\/td>100<\/td>110<\/td>162<\/td>165<\/td>395<\/td>230<\/td>300<\/td>236<\/td>70<\/td>15<\/td>115<\/td>65<\/td>80<\/td>160<\/td>175<\/td>53<\/td>150<\/td><\/tr>
    DRS56x150F\/009<\/a><\/td>56<\/td>150<\/td>125<\/td>177<\/td>169<\/td>415<\/td>280<\/td>363<\/td>292<\/td>70<\/td>15<\/td>115<\/td>65<\/td>80<\/td>210<\/td>225<\/td>53<\/td>150<\/td><\/tr>
    DRS56x200F\/003<\/a><\/td>56<\/td>200<\/td>125<\/td>177<\/td>169<\/td>415<\/td>330<\/td>363<\/td>292<\/td>70<\/td>15<\/td>115<\/td>65<\/td>80<\/td>260<\/td>275<\/td>53<\/td>150<\/td><\/tr>
     <\/td> <\/td> <\/td> <\/td> <\/td> <\/td> <\/td> <\/td> <\/td> <\/td> <\/td> <\/td> <\/td> <\/td> <\/td> <\/td> <\/td> <\/td> <\/td><\/tr>
    DRS63x50F\/006<\/a><\/td>63<\/td>50<\/td>110<\/td>162<\/td>165<\/td>395<\/td>180<\/td>323<\/td>236<\/td>70<\/td>15<\/td>115<\/td>65<\/td>80<\/td>110<\/td>125<\/td>53<\/td>150<\/td><\/tr>
    DRS63x100F\/006<\/a><\/td>63<\/td>100<\/td>110<\/td>162<\/td>165<\/td>395<\/td>230<\/td>300<\/td>236<\/td>70<\/td>15<\/td>115<\/td>65<\/td>80<\/td>160<\/td>175<\/td>53<\/td>150<\/td><\/tr>
    DRS63x150F\/006<\/a><\/td>63<\/td>150<\/td>125<\/td>177<\/td>169<\/td>415<\/td>280<\/td>363<\/td>292<\/td>70<\/td>15<\/td>115<\/td>65<\/td>80<\/td>210<\/td>225<\/td>53<\/td>150<\/td><\/tr>
    DRS63x200F\/003<\/a><\/td>63<\/td>200<\/td>125<\/td>177<\/td>169<\/td>415<\/td>330<\/td>363<\/td>292<\/td>70<\/td>15<\/td>115<\/td>65<\/td>80<\/td>260<\/td>275<\/td>53<\/td>150<\/td><\/tr>
     <\/td> <\/td> <\/td> <\/td> <\/td> <\/td> <\/td> <\/td> <\/td> <\/td> <\/td> <\/td> <\/td> <\/td> <\/td> <\/td> <\/td> <\/td> <\/td><\/tr>
    DRS80x100F\/003<\/a><\/td>80<\/td>100<\/td>150<\/td>215<\/td>228<\/td>510<\/td>268<\/td>391<\/td>328<\/td>90<\/td>15<\/td>148<\/td>102<\/td>127<\/td>165<\/td>190<\/td>63<\/td>200<\/td><\/tr>
    DRS80x150F\/003<\/a><\/td>80<\/td>150<\/td>150<\/td>215<\/td>228<\/td>510<\/td>318<\/td>391<\/td>328<\/td>90<\/td>15<\/td>148<\/td>102<\/td>127<\/td>215<\/td>240<\/td>63<\/td>200<\/td><\/tr>
    DRS80x200F\/003<\/a><\/td>80<\/td>200<\/td>150<\/td>215<\/td>228<\/td>510<\/td>368<\/td>431<\/td>328<\/td>90<\/td>15<\/td>148<\/td>102<\/td>127<\/td>265<\/td>290<\/td>63<\/td>200<\/td><\/tr>
    DRS80x300F\/003<\/a><\/td>80<\/td>300<\/td>200<\/td>265<\/td>228<\/td>590<\/td>468<\/td>474<\/td>411<\/td>90<\/td>15<\/td>148<\/td>102<\/td>127<\/td>365<\/td>390<\/td>63<\/td>200<\/td><\/tr>
     <\/td> <\/td> <\/td> <\/td> <\/td> <\/td> <\/td> <\/td> <\/td> <\/td> <\/td> <\/td> <\/td> <\/td> <\/td> <\/td> <\/td> <\/td> <\/td><\/tr>
    DRS100x400F\/003<\/a><\/td>100<\/td>400<\/td>200<\/td>290<\/td>270<\/td>620<\/td>644<\/td>570<\/td>350<\/td>90<\/td>30<\/td>148<\/td>150<\/td>200<\/td>450<\/td>500<\/td>120<\/td>250<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n
    Designation<\/td>Speed RPM max.<\/td>Speed Motor RPM<\/td>Power kW<\/td>Startingtime ED<\/td>Ampere A<\/td>Voltage V<\/td>Frequency Hz<\/td>Turning moment Nm<\/td>Diamond Roller Arbor<\/td><\/tr>
    DRS52x50F\/006<\/td>4500<\/td>2860<\/td>1,10<\/td>S1; 100%<\/td>2,45<\/td>230\/400V<\/td>50<\/td>3,70<\/td>STR52x50F\/006<\/td><\/tr>
    DRS52x100F\/005<\/td>4500<\/td>2860<\/td>1,10<\/td>S1; 100%<\/td>2,45<\/td>230\/400V<\/td>50<\/td>3,70<\/td>STR52x100F\/003<\/td><\/tr>
    DRS52x150F\/009<\/td>4500<\/td>2860<\/td>2,20<\/td>S1; 100%<\/td>4,65<\/td>230\/400V<\/td>50<\/td>7,40<\/td>STR52x150F\/003<\/td><\/tr>
    DRS52x200F\/003<\/td>4500<\/td>2860<\/td>2,20<\/td>S1; 100%<\/td>4,65<\/td>230\/400V<\/td>50<\/td>7,40<\/td>STR52x200F\/006<\/td><\/tr>
     <\/td> <\/td> <\/td> <\/td> <\/td> <\/td> <\/td> <\/td> <\/td> <\/td><\/tr>
    DRS56x50F\/006<\/td>4500<\/td>2860<\/td>1,10<\/td>S1; 100%<\/td>2,45<\/td>230\/400V<\/td>50<\/td>3,70<\/td>STR56x50F\/006<\/td><\/tr>
    DRS56x100F\/005<\/td>4500<\/td>2860<\/td>1,10<\/td>S1; 100%<\/td>2,45<\/td>230\/400V<\/td>50<\/td>3,70<\/td>STR56x100F\/003<\/td><\/tr>
    DRS56x150F\/009<\/td>4500<\/td>2860<\/td>2,20<\/td>S1; 100%<\/td>4,65<\/td>230\/400V<\/td>50<\/td>7,40<\/td>STR56x150F\/003<\/td><\/tr>
    DRS56x200F\/003<\/td>4500<\/td>2860<\/td>2,20<\/td>S1; 100%<\/td>4,65<\/td>230\/400V<\/td>50<\/td>7,40<\/td>STR56x200F\/006<\/td><\/tr>
     <\/td> <\/td> <\/td> <\/td> <\/td> <\/td> <\/td> <\/td> <\/td> <\/td><\/tr>
    DRS63x50F\/006<\/td>4500<\/td>2860<\/td>1,10<\/td>S1; 100%<\/td>2,45<\/td>230\/400V<\/td>50<\/td>3,70<\/td>STR63x50F\/006<\/td><\/tr>
    DRS63x100F\/006<\/td>4500<\/td>2860<\/td>1,10<\/td>S1; 100%<\/td>2,45<\/td>230\/400V<\/td>50<\/td>3,70<\/td>STR63x100F\/006<\/td><\/tr>
    DRS63x150F\/006<\/td>4500<\/td>2860<\/td>2,20<\/td>S1; 100%<\/td>4,65<\/td>230\/400V<\/td>50<\/td>7,40<\/td>STR63x150F\/001<\/td><\/tr>
    DRS63x200F\/003<\/td>4500<\/td>2860<\/td>2,20<\/td>S1; 100%<\/td>4,65<\/td>230\/400V<\/td>50<\/td>7,40<\/td>STR63x200F\/005<\/td><\/tr>
     <\/td> <\/td> <\/td> <\/td> <\/td> <\/td> <\/td> <\/td> <\/td> <\/td><\/tr>
    DRS80x100F\/003<\/td>4300<\/td>2850<\/td>3,00<\/td>S1; 100%<\/td>6,1<\/td>230\/400V<\/td>50<\/td>9,80<\/td>STR80x100F\/003<\/td><\/tr>
    DRS80x150F\/003<\/td>4300<\/td>2850<\/td>3,00<\/td>S1; 100%<\/td>6,1<\/td>230\/400V<\/td>50<\/td>9,80<\/td>STR80x150F\/003<\/td><\/tr>
    DRS80x200F\/003<\/td>4300<\/td>2850<\/td>3,00<\/td>S1; 100%<\/td>6,1<\/td>230\/400V<\/td>50<\/td>9,80<\/td>STR80x200F\/003<\/td><\/tr>
    DRS80x300F\/003<\/td>4300<\/td>2910<\/td>5,50<\/td>S1; 100%<\/td>11,3<\/td>230\/400V<\/td>50<\/td>18,00<\/td>STR80x300F\/003<\/td><\/tr>
     <\/td> <\/td> <\/td> <\/td> <\/td> <\/td> <\/td> <\/td> <\/td> <\/td><\/tr>
    DRS100x400F\/003<\/td>3000<\/td>2910<\/td>5,50<\/td>S1; 100%<\/td>11,3<\/td>230\/400V<\/td>50<\/td>18,00<\/td>STR100x400F\/001<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n

    Diamond Roller Dressing Unit for flat grinders and round grinders<\/h4>\n\n\n\n
    \n
    \n
    \"\"<\/figure>\n\n\n\n

    Basic diamond roll truing devices are mounted on the machine table of flat grinding machines and cylindrical grinding machines. The mandrel of the diamond roll is driven by an asynchronous motor using a toothed belt drive. This model is used for flat grinding machines and cylindrical grinding machines.<\/p>\n<\/div>\n\n\n\n

    \n

    Specifications<\/h3>\n\n\n\n
    • Diamond Roller Mounting \u00d8: 52h2; 56h2; 63h2 mm; 80h2 mm<\/li>
    • Diamond Roller Mounting width: 45 mm\u2009\u2013\u2009300 mm<\/li>
    • Diamond roller external \u00d8: 90 mm\u2009\u2013\u2009140 mm<\/li>
    • Speed with grease lubrication max. 12000 RPM<\/li>
    • Speed with oil mist lubrication max 20000 min-1<\/li><\/ul>\n\n\n\n

      Power data<\/h3>\n\n\n\n
      • AD\/C Electric motor 0.55 KW\u2009\u2013\u20093.0 KW<\/li>
      • Voltage 230V\u2009\/\u2009400V; 50HZ<\/li>
      • Type of protection IP 67, Speed 2800 RPM<\/li>
      • Alternative: \u0007Servomotor, Hydraulic Motor<\/li><\/ul>\n<\/div>\n<\/div>\n\n\n\n

        <\/p>\n<\/div><\/div>\n","protected":false},"excerpt":{"rendered":"

        Diamond Roller Dressing Unit for flat grinders, round grinders, internal circular grinders and slide way grinders Our truing devices with diamond rolls fulfil the specific requirements for diamond truing rolls. Performance and accuracy of the grinding wheel truing operation are decisively determined by the truing device in which the diamond truing roll is used.Our truing […]<\/p>\n","protected":false},"author":5,"featured_media":3851,"parent":9,"menu_order":50,"comment_status":"closed","ping_status":"closed","template":"","meta":{"footnotes":""},"class_list":["post-2829","page","type-page","status-publish","has-post-thumbnail","hentry"],"_links":{"self":[{"href":"https:\/\/steinmetz-schleiftechnik.de\/en\/wp-json\/wp\/v2\/pages\/2829","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/steinmetz-schleiftechnik.de\/en\/wp-json\/wp\/v2\/pages"}],"about":[{"href":"https:\/\/steinmetz-schleiftechnik.de\/en\/wp-json\/wp\/v2\/types\/page"}],"author":[{"embeddable":true,"href":"https:\/\/steinmetz-schleiftechnik.de\/en\/wp-json\/wp\/v2\/users\/5"}],"replies":[{"embeddable":true,"href":"https:\/\/steinmetz-schleiftechnik.de\/en\/wp-json\/wp\/v2\/comments?post=2829"}],"version-history":[{"count":12,"href":"https:\/\/steinmetz-schleiftechnik.de\/en\/wp-json\/wp\/v2\/pages\/2829\/revisions"}],"predecessor-version":[{"id":4354,"href":"https:\/\/steinmetz-schleiftechnik.de\/en\/wp-json\/wp\/v2\/pages\/2829\/revisions\/4354"}],"up":[{"embeddable":true,"href":"https:\/\/steinmetz-schleiftechnik.de\/en\/wp-json\/wp\/v2\/pages\/9"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/steinmetz-schleiftechnik.de\/en\/wp-json\/wp\/v2\/media\/3851"}],"wp:attachment":[{"href":"https:\/\/steinmetz-schleiftechnik.de\/en\/wp-json\/wp\/v2\/media?parent=2829"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}